 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SAW Components SAW IF filter WCDMA Series/type: Ordering code: Date: Version: B5060 B39171-B5060-H810 Mar 13, 2007 2.0 (c) EPCOS AG 2007. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. SAW Components SAW IF filter Data sheet Application s Low-loss IF filter for WCDMA base station s Usable passband 10 MHz s Balanced or unbalanced operation possible B5060 167.0 MHz Features Package size 7.0 x 5.0 x 1.33 mm3 Package code QCC12E RoHS compatible Approx. weight 0.25 g Ceramic package for Surface Mount Technology (SMT) s Ni, gold-plated terminals s Electrostatic Sensitive Device (ESD) s Filter surface passivated s s s s s Pin configuration s s s s s s 10 12 4 6 2, 3, 8, 9 1, 5, 7, 11 Input Input ground or input balance Output Output ground or output balance To be grounded Case ground 10 4 12 6 1,5,7,11 Please read cautions and warnings and important notes at the end of this document. 2 Mar 13, 2007 SAW Components SAW IF filter Data sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: T= ZS = ZL = -10 to 85 C 50 and matching network 50 and matching network min. Nominal frequency Minimum insertion attenuation (including matching network) fN min -- -- typ. @ 25 C 167.0 6.9 max. -- 8.0 MHz dB B5060 167.0 MHz Maximum insertion attenuation max (including matching network) fN 5.0 MHz Passband width rel 1.0 dB Amplitude ripple (p-p) fN 5.0 MHz B1dB -- 7.3 9.0 dB 10 13.0 -- MHz -- 0.4 1.0 dB Error Vector Magnitude EVM fN - 2.5 MHz 1.92 MHz fN + 2.5 MHz 1.92 MHz Return Loss fN 5.0 MHz Input IP3 -- -- 0.9 0.9 4.0 4.0 % % 10.0 13.0 -- dB 40 Relative attenuation (relative to min) rel fN - 7.5 MHz ... fN - 10.0 MHz fN + 7.5 MHz ... fN + 10.0 MHz fN 10.0 MHz ... fN 20.0 MHz fN 20.0 MHz ... fN 57.0 MHz Temperature coefficient of frequency TCf -- -- dBm 0.5 1.5 25 40 -- 5.2 6.6 41 48 -87 -- -- -- -- -- dB dB dB dB ppm/K Please read cautions and warnings and important notes at the end of this document. 3 Mar 13, 2007 SAW Components SAW IF filter Data sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: T= ZS = ZL = -40 to 85 C 50 and matching network 50 and matching network min. Nominal frequency Minimum insertion attenuation (including matching network) fN min -- -- typ. @ 25 C 167.0 6.9 max. -- 8.0 MHz dB B5060 167.0 MHz Maximum insertion attenuation max (including matching network) fN 5.0 MHz Passband width rel 1.0 dB Amplitude ripple (p-p) fN 5.0 MHz B1dB -- 7.3 9.0 dB 10 13.0 -- MHz -- 0.4 1.0 dB Error Vector Magnitude EVM fN - 2.5 MHz 1.92 MHz fN + 2.5 MHz 1.92 MHz Return Loss fN 5.0 MHz Input IP3 -- -- 0.9 0.9 4.0 4.0 % % 10.0 12.0 -- dB 40 Relative attenuation (relative to min) rel fN - 7.5 MHz ... fN - 10.0 MHz fN + 7.5 MHz ... fN + 10.0 MHz fN 10.0 MHz ... fN 20.0 MHz fN 20.0 MHz ... fN 57.0 MHz Temperature coefficient of frequency TCf -- -- dBm 0.5 0.5 25 40 -- 5.2 6.6 41 48 -87 -- -- -- -- -- dB dB dB dB ppm/K Please read cautions and warnings and important notes at the end of this document. 4 Mar 13, 2007 SAW Components SAW IF filter Data sheet Matching network to 50 unbalanced B5060 167.0 MHz Ls1 = 62 nH Lp2 = 91 nH Lp3 = 150 nH Ls4 = 91 nH Maximum ratings Operable temperature range Storage temperature range DC voltage ESD voltage Input power Input peak power 1) T Tstg VDC VESD PIN PIN,peak -40/+85 -40/+85 0 2001) 10 23 C C V V dBm dBm machine model, 1 pulse for max. 100 hours acc. to J-STD22A-0115A (machine model, 1 pulse +/-). Please read cautions and warnings and important notes at the end of this document. 5 Mar 13, 2007 SAW Components SAW IF filter Data sheet Transfer function B5060 167.0 MHz Transfer function (wideband) Please read cautions and warnings and important notes at the end of this document. 6 Mar 13, 2007 SAW Components SAW IF filter Data sheet B5060 167.0 MHz References Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible S_6001 defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." B5060 B39171-B5060-H810 C61157-A7-A103 F61074-V8170-Z000 L_1126 For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY (c) EPCOS AG 2007. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 7 Mar 13, 2007 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 2. 3. 4. 5. 6. 7. 8 Mar 13, 2007 |
Price & Availability of B39171-B5060-H810
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |